MSR Treatment Performance Visualizer

Multi-Stage Recirculating Constructed Wetland Modeling
Visit AquaSai
Input Parameters
Configure the operational parameters of your wetland system. Adjust flow rates, stages, and retention times to model different treatment scenarios.
2 4 7
0:1 2:1 5:1
1 day 3 days 10 days
Influent Water Quality
Define the initial pollutant concentrations in the incoming water. These values represent the contamination levels before treatment begins.
i
System Efficiency
Overall effectiveness of the wetland at cleaning water. Higher percentages mean better treatment. Think of it as a "grade" for how well the system performs.
 System Efficiency
0%
i
Total Retention Time
Total time water spends in the entire system. Longer times typically mean better treatment quality. It's the sum of time in each stage plus recirculation.
 Total HRT
0d
Includes recirculation
i
Required Surface Area
Total wetland footprint needed based on flow rate and treatment goals. Larger flows or higher treatment levels need more area. Measured in square meters.
 Required Area
0m²
Total wetland footprint
i
Pollutant Load Removed
Total mass of pollutants removed daily. Shows actual cleaning capacity - how many kilograms of waste the system removes each day.
 Load Removed
0kg
Total daily removal
Multi-Stage Treatment Flow
Visual representation of water flowing through treatment stages. Water enters untreated, passes through multiple wetland stages, and exits clean.
Removal Performance by Stage
Shows how much of each pollutant is removed at every treatment stage. Watch pollutant concentrations decrease as water progresses through the system.
Overall Removal Efficiency
Total percentage of each pollutant removed from start to finish. These efficiency ratings show the system's effectiveness for each contaminant type.
Final Effluent Quality
Final pollutant concentrations after complete treatment. These are the water quality levels leaving your wetland system, ready for discharge or reuse.
BOD Effluent
0
mg/L
TSS Effluent
0
mg/L
Nitrogen Effluent
0
mg/L
Phosphorus Effluent
0
mg/L